You are here:   Home 顯微影像|Micro-imaging 顯微鏡光源|Light Source PhotoFluor II 螢光顯微鏡光源控制系統

PhotoFluor II 螢光顯微鏡光源控制系統

E-mail 列印

 

PhotoFluor II 結合了強力的金屬鹵化物燈源(metal halide lamp)與噴灑式熱阻光學(sputtered heat-blocking optic) 可傳遞最佳光譜的光源輸出。

另具有1500小時的燈泡壽命和預先校正的光源引擎。 PhotoFluor® II的效能遠遠超越一般的100瓦水銀(汞)燈.

 

PhotoFluor II原廠型錄下載 (PDF) 

請儘速與我們連絡了解更多詳情 04-22511422 

 

 

 

 

 

 

 

 

 

 

 

 產品特點:


 
 上圖左方為使用PhotoFluor II所產生的效果,明顯在對比與亮度都優於傳統的100瓦汞燈(右圖)

 

搭載軟體可由電腦控制shutter、filter轉盤位置及名稱設置、電源控制、光源待命及連續作動程式


穩定的光源系統,且投資可以快速的回收

PhotoFluor® II run at 60% output to match 100% power levels of the 120 W metal halide source. Light guide to collimating adapter to 0.5 ND filter to HQ470/40x filter to silicon detector, measurements by Newport 1830C followed by A/D conversion. Sampling at 2000 Hz for five seconds. 49004 filter set used with Tetraspeck slide. 20 X Zeiss objective.

 

產品規格: 
實體特微:

寬度 36.8 cm (14.5 inches)

高度 13.2 cm (5.2 inches)

深度 32.5 cm (12.8 inches)

重量 7.5 kg (16.6 lbs.)

Operating Mode Continuous

防水等級 IPX0

Main Cable 10 A/250 V; Jack IEC 320/C13

電源供應 100–240 V, 50/60 Hz, 3.15 A; Remote On/Off

‘SOFT OFF’ button on keypad deactivates lamp to save power and bulb life. 
Electronics remain in low power standby mode.

保險絲 T3.15A 250V

控制鍵 Five button control

Liquid Light Guide

5mm Core x 2m (6.5 feet) length

3mm Core x 2m (6.5 feet) length

Lamp

Type 200 W Ushio EmArc SMR200 D1

Output Approx. 20 W with 5 mm core,

12 W with 3 mm core

Filter Wheel

Mode Motorized operation

Contents Attenuation screens, can accept heat tolerant excitation filters

Motorized Shutter Approx 250 ms response time

Ambient conditions for operation

Temperature 10° to 25°C (50° to 77°F)

Relative Humidity 30% to 75%

Air Pressure 700 hPa to 1060 hPa

ETL and CE/CSA compliant

Display and Safety features

Clear display of lamp time, filter wheel position

Automatic system diagnostics

Resettable lamp counter with warnings

Four line by 20 character display (dimmable)

Safety interlocks, output light blocked in absence of light guide

Overtemperature protection with software warnings and hardware shutdown

Serial Connection

Serial control: Computer interface with provided or easily

customized software via binary or ASCII commands.

User adjusted contrast, volume, filter wheel position names.

需要進一步資訊請洽 04-22511422 張先生